<?xml version="1.0" encoding="UTF-8"?><xml><records><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Lane G Tidwell</style></author><author><style face="normal" font="default" size="100%">LB Paulik</style></author><author><style face="normal" font="default" size="100%">Kim A Anderson</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Air-water exchange of PAHs and OPAHs at a superfund mega-site.</style></title><secondary-title><style face="normal" font="default" size="100%">Sci Total Environ</style></secondary-title><alt-title><style face="normal" font="default" size="100%">Sci. Total Environ.</style></alt-title></titles><dates><year><style  face="normal" font="default" size="100%">2017</style></year><pub-dates><date><style  face="normal" font="default" size="100%">2017 Mar 31</style></date></pub-dates></dates><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Chemical fate is a concern at environmentally contaminated sites, but characterizing that fate can be difficult. Identifying and quantifying the movement of chemicals at the air-water interface are important steps in characterizing chemical fate. Superfund sites are often suspected sources of air pollution due to legacy sediment and water contamination. A quantitative assessment of polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAH (OPAHs) diffusive flux in a river system that contains a Superfund Mega-site, and passes through residential, urban and agricultural land, has not been reported before. Here, passive sampling devices (PSDs) were used to measure 60 polycyclic aromatic hydrocarbons (PAHs) and 22 oxygenated PAH (OPAHs) in air and water. From these concentrations the magnitude and direction of contaminant flux between these two compartments was calculated. The magnitude of PAH flux was greater at sites near or within the Superfund Mega-site than outside of the Superfund Mega-site. The largest net individual PAH deposition at a single site was naphthalene at a rate of -14,200 (±5780) (ng/m(2))/day. The estimated one-year total flux of phenanthrene was -7.9×10(5) (ng/m(2))/year. Human health risk associated with inhalation of vapor phase PAHs and dermal exposure to PAHs in water were assessed by calculating benzo[a]pyrene equivalent concentrations. Excess lifetime cancer risk estimates show potential increased risk associated with exposure to PAHs at sites within and in close proximity to the Superfund Mega-site. Specifically, estimated excess lifetime cancer risk associated with dermal exposure and inhalation of PAHs was above 1 in 1 million within the Superfund Mega-site. The predominant depositional flux profile observed in this study suggests that the river water in this Superfund site is largely a sink for airborne PAHs, rather than a source.&lt;/p&gt;
</style></abstract></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">LB Paulik</style></author><author><style face="normal" font="default" size="100%">Carey E Donald</style></author><author><style face="normal" font="default" size="100%">Brian W Smith</style></author><author><style face="normal" font="default" size="100%">Lane G Tidwell</style></author><author><style face="normal" font="default" size="100%">Kevin A Hobbie</style></author><author><style face="normal" font="default" size="100%">Laurel D Kincl</style></author><author><style face="normal" font="default" size="100%">Erin N Haynes</style></author><author><style face="normal" font="default" size="100%">Kim A Anderson</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Emissions of Polycyclic Aromatic Hydrocarbons from Natural Gas Extraction into Air.</style></title><secondary-title><style face="normal" font="default" size="100%">Environ Sci Technol</style></secondary-title><alt-title><style face="normal" font="default" size="100%">Environ. Sci. Technol.</style></alt-title></titles><dates><year><style  face="normal" font="default" size="100%">2016</style></year><pub-dates><date><style  face="normal" font="default" size="100%">07/2016</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">50</style></volume><pages><style face="normal" font="default" size="100%">7921-9</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Natural gas extraction, often referred to as &quot;fracking&quot;, has increased rapidly in the United States in recent years. To address potential health impacts, passive air samplers were deployed in a rural community heavily affected by the natural gas boom. Samplers were analyzed for 62 polycyclic aromatic hydrocarbons (PAHs). Results were grouped based on distance from each sampler to the nearest active well. Levels of benzo[a]pyrene, phenanthrene, and carcinogenic potency of PAH mixtures were highest when samplers were closest to active wells. PAH levels closest to natural gas activity were comparable to levels previously reported in rural areas in winter. Sourcing ratios indicated that PAHs were predominantly petrogenic, suggesting that PAH levels were influenced by direct releases from the earth. Quantitative human health risk assessment estimated the excess lifetime cancer risks associated with exposure to the measured PAHs. At sites closest to active wells, the risk estimated for maximum residential exposure was 0.04 in a million, which is below the U.S. Environmental Protection Agency&#039;s acceptable risk level. Overall, risk estimates decreased 30% when comparing results from samplers closest to active wells to those farthest from them. This work suggests that natural gas extraction is contributing PAHs to the air, at levels that would not be expected to increase cancer risk.&lt;/p&gt;
</style></abstract><issue><style face="normal" font="default" size="100%">14</style></issue></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">LB Paulik</style></author><author><style face="normal" font="default" size="100%">Brian W Smith</style></author><author><style face="normal" font="default" size="100%">Alan J Bergmann</style></author><author><style face="normal" font="default" size="100%">Gregory J Sower</style></author><author><style face="normal" font="default" size="100%">Norman D Forsberg</style></author><author><style face="normal" font="default" size="100%">JG Teeguarden</style></author><author><style face="normal" font="default" size="100%">Kim A Anderson</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Passive samplers accurately predict PAH levels in resident crayfish.</style></title><secondary-title><style face="normal" font="default" size="100%">Sci Total Environ</style></secondary-title><alt-title><style face="normal" font="default" size="100%">Sci. Total Environ.</style></alt-title></titles><dates><year><style  face="normal" font="default" size="100%">2016</style></year><pub-dates><date><style  face="normal" font="default" size="100%">02/2016</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">544</style></volume><pages><style face="normal" font="default" size="100%">782-791</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Contamination of resident aquatic organisms is a major concern for environmental risk assessors. However, collecting organisms to estimate risk is often prohibitively time and resource-intensive. Passive sampling accurately estimates resident organism contamination, and it saves time and resources. This study used low density polyethylene (LDPE) passive water samplers to predict polycyclic aromatic hydrocarbon (PAH) levels in signal crayfish, Pacifastacus leniusculus. Resident crayfish were collected at 5 sites within and outside of the Portland Harbor Superfund Megasite (PHSM) in the Willamette River in Portland, Oregon. LDPE deployment was spatially and temporally paired with crayfish collection. Crayfish visceral and tail tissue, as well as water-deployed LDPE, were extracted and analyzed for 62 PAHs using GC-MS/MS. Freely-dissolved concentrations (Cfree) of PAHs in water were calculated from concentrations in LDPE. Carcinogenic risks were estimated for all crayfish tissues, using benzo[a]pyrene equivalent concentrations (BaPeq). ∑PAH were 5-20 times higher in viscera than in tails, and ∑BaPeq were 6-70 times higher in viscera than in tails. Eating only tail tissue of crayfish would therefore significantly reduce carcinogenic risk compared to also eating viscera. Additionally, PAH levels in crayfish were compared to levels in crayfish collected 10years earlier. PAH levels in crayfish were higher upriver of the PHSM and unchanged within the PHSM after the 10-year period. Finally, a linear regression model predicted levels of 34 PAHs in crayfish viscera with an associated R-squared value of 0.52 (and a correlation coefficient of 0.72), using only the Cfree PAHs in water. On average, the model predicted PAH concentrations in crayfish tissue within a factor of 2.4±1.8 of measured concentrations. This affirms that passive water sampling accurately estimates PAH contamination in crayfish. Furthermore, the strong predictive ability of this simple model suggests that it could be easily adapted to predict contamination in other shellfish of concern.&lt;/p&gt;
</style></abstract></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">LB Paulik</style></author><author><style face="normal" font="default" size="100%">Carey E Donald</style></author><author><style face="normal" font="default" size="100%">Brian W Smith</style></author><author><style face="normal" font="default" size="100%">Lane G Tidwell</style></author><author><style face="normal" font="default" size="100%">Kevin A Hobbie</style></author><author><style face="normal" font="default" size="100%">Laurel D Kincl</style></author><author><style face="normal" font="default" size="100%">Erin N Haynes</style></author><author><style face="normal" font="default" size="100%">Kim A Anderson</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Impact of natural gas extraction on PAH levels in ambient air.</style></title><secondary-title><style face="normal" font="default" size="100%">Environ Sci Technol</style></secondary-title><alt-title><style face="normal" font="default" size="100%">Environ. Sci. Technol.</style></alt-title></titles><dates><year><style  face="normal" font="default" size="100%">2015</style></year><pub-dates><date><style  face="normal" font="default" size="100%">03/2015</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">49</style></volume><pages><style face="normal" font="default" size="100%">5203-5210</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Natural gas extraction, often referred to as &quot;fracking,&quot; has increased rapidly in the U.S. in recent years. To address potential health impacts, passive air samplers were deployed in a rural community heavily affected by the natural gas boom. Samplers were analyzed for 62 polycyclic aromatic hydrocarbons (PAHs). Results were grouped based on distance from each sampler to the nearest active well. PAH levels were highest when samplers were closest to active wells. Additionally, PAH levels closest to natural gas activity were an order of magnitude higher than levels previously reported in rural areas. Sourcing ratios indicate that PAHs were predominantly petrogenic, suggesting that elevated PAH levels were influenced by direct releases from the earth. Quantitative human health risk assessment estimated the excess lifetime cancer risks associated with exposure to the measured PAHs. Closest to active wells, the risk estimated for maximum residential exposure was 2.9 in 10,000, which is above the U.S. EPA&#039;s acceptable risk level. Overall, risk estimates decreased 30% when comparing results from samplers closest to active wells to those farthest. This work suggests that natural gas extraction may be contributing significantly to PAHs in air, at levels that are relevant to human health.&lt;/p&gt;
</style></abstract><issue><style face="normal" font="default" size="100%">8</style></issue></record><record><source-app name="Biblio" version="7.x">Drupal-Biblio</source-app><ref-type>17</ref-type><contributors><authors><author><style face="normal" font="default" size="100%">Steven G O&#039;Connell</style></author><author><style face="normal" font="default" size="100%">McCartney, Melissa A</style></author><author><style face="normal" font="default" size="100%">LB Paulik</style></author><author><style face="normal" font="default" size="100%">Sarah E Allan</style></author><author><style face="normal" font="default" size="100%">Lane G Tidwell</style></author><author><style face="normal" font="default" size="100%">Glenn R Wilson</style></author><author><style face="normal" font="default" size="100%">Kim A Anderson</style></author></authors></contributors><titles><title><style face="normal" font="default" size="100%">Improvements in pollutant monitoring: Optimizing silicone for co-deployment with polyethylene passive sampling devices.</style></title><secondary-title><style face="normal" font="default" size="100%">Environ Pollut</style></secondary-title><alt-title><style face="normal" font="default" size="100%">Environ. Pollut.</style></alt-title></titles><dates><year><style  face="normal" font="default" size="100%">2014</style></year><pub-dates><date><style  face="normal" font="default" size="100%">07/2014</style></date></pub-dates></dates><volume><style face="normal" font="default" size="100%">193C</style></volume><pages><style face="normal" font="default" size="100%">71-78</style></pages><language><style face="normal" font="default" size="100%">eng</style></language><abstract><style face="normal" font="default" size="100%">&lt;p&gt;Sequestering semi-polar compounds can be difficult with low-density polyethylene (LDPE), but those pollutants may be more efficiently absorbed using silicone. In this work, optimized methods for cleaning, infusing reference standards, and polymer extraction are reported along with field comparisons of several silicone materials for polycyclic aromatic hydrocarbons (PAHs) and pesticides. In a final field demonstration, the most optimal silicone material is coupled with LDPE in a large-scale study to examine PAHs in addition to oxygenated-PAHs (OPAHs) at a Superfund site. OPAHs exemplify a sensitive range of chemical properties to compare polymers (log Kow 0.2-5.3), and transformation products of commonly studied parent PAHs. On average, while polymer concentrations differed nearly 7-fold, water-calculated values were more similar (about 3.5-fold or less) for both PAHs (17) and OPAHs (7). Individual water concentrations of OPAHs differed dramatically between silicone and LDPE, highlighting the advantages of choosing appropriate polymers and optimized methods for pollutant monitoring.&lt;/p&gt;
</style></abstract><custom1><style face="normal" font="default" size="100%">http://www.ncbi.nlm.nih.gov/pubmed/25009960?dopt=Abstract</style></custom1></record></records></xml>